Biofires.com
Fibre Glow
Fibre Glow
- In Stock
Hand sculpt it to create a light net and place over the flame. Does not burn and doesn’t retain heat. The stunning glowing ember effect will give the most realistic additional touch to your bioethanol fireplace.
Couldn't load pickup availability
The Fibre Glow is a special extra fine and light metal mesh created for Bio Ethanol Fireplaces. Hand sculpt it to create a light net and place over the flame for a stunning flickering embers impression. Makes the flame even more hypnotic!
A small addition to your fire which makes a big difference.
The Fibre Glow does not burn and doesn’t retain heat. When handled gently will last for up to 300 hrs.
It is the only accessory which can be placed over the flame with Bioethanol Fires.
Always remember to remove it before extinguishing your fireplace.
How big is the pack?
The amount of glowing fibre shown on the front picture, spread lightly over the fire opening is representative to the amount you are actually receiving in a pack.
The size of the pack seems small – 1 gram, but please bear in mind that Glowing Fibre can't be in a thick layer over the flame as it will reduce the flame heavily if you use too much. The amount we supply is recommended for our standard size Container Small Burner featured in 80% of our bigger fireplaces.
If you are purchasing our large grates using our 3 litre burning, you will need x3 packs of the Fibre Glow to cover the surface. For a guidance if your flame opening is much bigger than approx. 26 x 2.5 cm or 35 x 0.5cm you may need more than one pack.
Technical Info
- Pack size: 1g
- Expected life time: up to 300 hrs
- Suitable for: both Bioethanol Fireplaces and Gel Fireplace
Delivery
When in stock, delivery within approx. 2-5 days.
Sent via Royal Mail if purchased individually, usually delivered within 3-5 working days.
Free Delivery promotion: please note that the delivery is only free to UK mainland (go to our DELIVERY section for postcodes which qualify for a delivery supplement).
